Skip to main content

Ron Mueck in Ottawa

This week-end, I've especially been to Ottawa to see Ron Mueck's exhibition at Musée des Beau-Arts. I knew a little about Mueck before this exhibition, mostly thru an email waving along showing a couple of his hyperealistics sculptures. A quick glance on google informed me this Australian native has his studio in London and used to work for Jim Henson's "Muppets show". But how realistic could hyperealistic be ?
Eh...definitely realistic! Almost all the models are nudes, probably to enhance again the realism. Everything is here: hairs, pimples, spots, wrinkles, everything. You may wonder how such a realism is possible; does he use any computer stuff, any modeling trick? Not at all, buddy. Everything is done the classic way, with clay... and a huge amount of talent.

Comments

Post a Comment

Popular posts from this blog

Drive replacement for Fostex DMT8-vl

The IDE hard drive on my Fostex DMT8-vl multitrack recorder shows signs of its imminent death; when getting hot, I could not record anymore. Must be said this drive comes from an old Sun Station, and has been replaced because I/O failures were detected by Solaris. It worked at least 5 years in my recorder: not so bad. However, time is now to replace it. The DMT8-vl is not able to handle drives bigger than 8.4 GB. Well, it is able to (the current drive is 15 GB), but only 8.4 GB will be usable. My tought was to use a 8 GB CompactFlash; having no moving parts means no noise, which is quite temptating for a music recording device. I purchased a CompactFlash-IDE adapter on the internet (8$) and I had to build a male-male IDE cable adapter (4$). Unfortunately, this doesn't work. The drive is correctly discovered by the operating system, which proposes to format it ("format IDE?"). After answering "yes", the formating runs pretty fast (faster than on a real drive), ...
6 comments
Read more

Samba: Clients get "system error 1223" (or 123) after a server reboot

Facts: a Linux+Samba server shares anonymously a folder. After a reboot, Win clients could not attach the share drive anymore. C:\>net use \\mylinux\folder Enter the user name for 'mylinux': System error 1223 has occurred. The operation was canceled by the user. C:\>net view \\mylinux\ System error 123 has occurred. The filename, directory name, or volume label syntax is incorrect. The process are present, and tcpdump doesn't provide much information. What's going on? After hours of headscratching, the light came: the firewall was on and no rules for the Samba protocol! Grrr!
2 comments
Read more

Issue with Soundpool MO4

I have a Atari STe with a Soundpool MO4 MIDI extension. It used to work very well, but unfortunatelly doesn't anymore: Cubase still detects it, and I can output MIDI to it but nothing is coming out from any MIDI Out. It took me a while to tackle it (lack of time, lack of tool, other items to play with), but I gave a glance last week-end. The parallel port on the Atari uses only the following signals: Pin 1 : Strobe (Atari -> MO4) Pin 2 : Data 0 (Atari -> MO4) Pin 3 : Data 1 (Atari -> MO4) Pin 4 : Data 2 (Atari -> MO4) Pin 5 : Data 3 (Atari -> MO4) Pin 6 : Data 4 (Atari -> MO4) Pin 7 : Data 5 (Atari -> MO4) Pin 8 : Data 6 (Atari -> MO4) Pin 9 : Data 7 (Atari -> MO4) Pin 11: Busy (MO4 -> Atari) The MO4 also decodes few other pins, but since the Atari doesn't, my guess is the MO4 was also targeted for PC. Inside the box, the MO4 is architectured around a CPLD (IspLSI1016 from Lattice) which contains the logi...
7 comments
Read more