Skip to main content

Made in Korea

Au milieu des années 80, quand le MIDI commençait à se répendre, les constructeurs proposaient des accessoires MIDI dans leurs catalogues. C'était le cas notamment pour Yamaha avec son MIDI Expander YME8, visible entre autre dans leur catalogue "The World of Musical Instruments". Mais ces accessoires "officiels" étaient souvent très chers, et une offre parallèle est apparue. Quand j'ai eu le besoin d'acheter une MIDI Thru box (autre nom pour le MIDI Expander), le magasin m'a proposé un équivalent moins cher, le MD80 de LEEM, qui n'est autre qu'une copie coréenne du YME8. Bas prix, car la qualité de réalisation est loin d'égaler celle de Yamaha: le boîtier ne ferme pas parfaitement (alors que le Yamaha possède deux boîtiers: un intérieur sur lequel est fixé le régulateur de tension, un extérieur conportant la sérigraphie), la sérigraphie est grossière, la visserie n'est pas homogène, même les patins en caoutchouc sont différents (2 d'une sorte, 2 d'une autre sorte)
Mais bon, malgrés cela, il marche sans problème depuis que je l'ai acheté.
Labels:

Comments

Post a Comment

Popular posts from this blog

Drive replacement for Fostex DMT8-vl

The IDE hard drive on my Fostex DMT8-vl multitrack recorder shows signs of its imminent death; when getting hot, I could not record anymore. Must be said this drive comes from an old Sun Station, and has been replaced because I/O failures were detected by Solaris. It worked at least 5 years in my recorder: not so bad. However, time is now to replace it. The DMT8-vl is not able to handle drives bigger than 8.4 GB. Well, it is able to (the current drive is 15 GB), but only 8.4 GB will be usable. My tought was to use a 8 GB CompactFlash; having no moving parts means no noise, which is quite temptating for a music recording device. I purchased a CompactFlash-IDE adapter on the internet (8$) and I had to build a male-male IDE cable adapter (4$). Unfortunately, this doesn't work. The drive is correctly discovered by the operating system, which proposes to format it ("format IDE?"). After answering "yes", the formating runs pretty fast (faster than on a real drive), ...
6 comments
Read more

Samba: Clients get "system error 1223" (or 123) after a server reboot

Facts: a Linux+Samba server shares anonymously a folder. After a reboot, Win clients could not attach the share drive anymore. C:\>net use \\mylinux\folder Enter the user name for 'mylinux': System error 1223 has occurred. The operation was canceled by the user. C:\>net view \\mylinux\ System error 123 has occurred. The filename, directory name, or volume label syntax is incorrect. The process are present, and tcpdump doesn't provide much information. What's going on? After hours of headscratching, the light came: the firewall was on and no rules for the Samba protocol! Grrr!
2 comments
Read more

Issue with Soundpool MO4

I have a Atari STe with a Soundpool MO4 MIDI extension. It used to work very well, but unfortunatelly doesn't anymore: Cubase still detects it, and I can output MIDI to it but nothing is coming out from any MIDI Out. It took me a while to tackle it (lack of time, lack of tool, other items to play with), but I gave a glance last week-end. The parallel port on the Atari uses only the following signals: Pin 1 : Strobe (Atari -> MO4) Pin 2 : Data 0 (Atari -> MO4) Pin 3 : Data 1 (Atari -> MO4) Pin 4 : Data 2 (Atari -> MO4) Pin 5 : Data 3 (Atari -> MO4) Pin 6 : Data 4 (Atari -> MO4) Pin 7 : Data 5 (Atari -> MO4) Pin 8 : Data 6 (Atari -> MO4) Pin 9 : Data 7 (Atari -> MO4) Pin 11: Busy (MO4 -> Atari) The MO4 also decodes few other pins, but since the Atari doesn't, my guess is the MO4 was also targeted for PC. Inside the box, the MO4 is architectured around a CPLD (IspLSI1016 from Lattice) which contains the logi...
7 comments
Read more